Eight-station cylinder sleeve centrifugal casting machine
Eight-station cylinder sleeve centrifugal casting machine

essay on social welfare go to site Summary

http://dig.csail.mit.edu/wiki/images/faq.php?toq=mla-research-paper-quotation&how=6 Eight-stations cylinder sleeve centrifugal casting machine is widely used for castings of cylinder sleeve。The whole machine is made up of rotary working platform,the automatic cleaning device,the automatic spraying device,the automatic pouring device,Pipe pulling device,mold cooling system and temperature measuring device.
It has the following advantages:
1.A high degree of automation
2.Occupying less area
3.High productivity
It is propitious to large-lot production of cylinder sleeve.

see url enter site F go to link eatures
source url 1 Cantilever centrifugal casting machine
Cantilever centrifugal casting machine is the core part. On the rotary working platform there are eight host machines which are regular distribution. Converter motor drives the main axis rotate with belt. The main axis makes mold rotate and then complete the centrifugal casting. The mold is fixed on the turnplate. Speed of mainshaft can realize stepless speed regulation so that the equipment can be able to fulfill technical requirements of casting with different diameter. For the sake of safety in production, every machine equips safety protection cover.
go to link 2 The rotary working platform
The rotary working platform is the key of eight-stations cylinder sleeve centrifugal casting machine. Servomotor drives slewing ring bearing by gear drive so that the rotary working platform rotates. Swinging action has accurate positioning by servomotor control. The rotary working platform rotates intermittently. Pause after each 45 ° then complete their action at each station,and then rotate to the next station. When working platform turn a circle , a process of centrifugal casting can be completed . According to the technological parameters of each station, The pause time and rotating speed can be set and accurately controlled.
http://dig.csail.mit.edu/wiki/images/faq.php?toq=how-to-help-with-homework&how=6 3 Cleaning device
Cleaning device can realize the cleaning by cleaning brush within the scope of the product specification. Pipe die is cleaned by cleaning rod with reciprocating movement.The cleaning brush is replaceable Within the scope of the workplace.
determinants of supply elasticity 4 Automatic spraying device
Automatic spraying device can move accurately by servo. In order to meet the requirements of the production process, the spraying pole move and spray the mold cavity automatically.
name of english news paper in india 5 Automatic pouring device
Automatic pouring device consist of pouring ladle, automatic weighing device (the accuracy of 100g, reaction time is less than 0.2S), Ladle tilting device, pouring basin and moving vehicle. The molten metal which is in the pouring ladle is detected by automatic weighing device and displayed in the big screen. When the molten metal reaches the setting weight, it will stop adding. Molten metal is poured into the mold through the Ladle,which is driven by variable frequency motor. After pouring,the pouring car is back to the furnace front position where is pouring molten iron. Wait for the next pouring. The speed of pouring ladle tilting can be adjusted according to the process requirements.
http://dig.csail.mit.edu/wiki/images/faq.php?toq=thesis-template-texniccenter&how=6 6 Pipe pulling and removing cover device
On the pipe pulling station, It completes two actions which are removing cover and pulling pipe. This device is made up of two parts, one is removing cover .the other is pipe pulling. All actions are automatical.
click 7 Mold cooling system
All the eight centrifugal casting machines equip cooling channel. The axial mold can be cooled uniformly by water throughout the process. Each cooling nozzle can be adjusted manually in order to control the cooling flow.
http://dig.csail.mit.edu/wiki/images/faq.php?toq=abstract-example-in-thesis&how=6 8 Mold temperature measuring device
There are three stations for cooling,which equip temperature measuring device for mold.The temperature of middle mold can be detected real time.At the same time the temperature is displayed on the touch screen.
http://dig.csail.mit.edu/wiki/images/faq.php?toq=dissertation-in-uk&how=6 9 Electrical control system
The PLC  is the control unit. The display unit is touch screen which can set process parameters and store no less than 20 casting process parameters.Control system has two kinds of options to choose manual and automatic, which can be switched according to the requirements. When adjusting equipment we can choice the manual program, When regular production we can choice automatic program. Each host machine can be switched on/off line in the work process.

http://dig.csail.mit.edu/wiki/images/faq.php?toq=nursing-thesis-introduction-sample&how=6 http://www.emccdesign.com/interactive/?ter=quit-smoking-essay-example&cj=8 Main technical parameters

http://www.emccdesign.com/interactive/?ter=sample-research-paper-recycling&cj=8 go site Name of parameter

http://www.emccdesign.com/interactive/?ter=the-body-of-an-essay-includes&cj=8 http://dig.csail.mit.edu/wiki/images/faq.php?toq=thesis-statement-examples-social-networking&how=6 Parameter values

thesis format sample paper go to link Unit

schiller essays Turntable diameter

go here 2500

mm

Number of station

8

Rotation power of motor

4

Kw

Mold rotation diameter

Φ420

mm

Casting maximum diameter

Φ120

mm

Casting maximum length

300-600

mm

Speed of mold

0~1600

rpm

Main machine power of motor

5.5

Kw

Centre-to-centre spacing between the ground and mold

1000

mm

Total power of the machine

55

Kw

 

http://www.emccdesign.com/interactive/?ter=persuasive-essay-samples&cj=8